高输出功率小交流电测试仪（耐电孤测试仪）-（操作系统控住）

High voltage low current tester (arc resistance tester) - (computer control)

护肤公司名称称：耐电弧试验机

Product name: electric arc resistance tester

的产品款型：NDH-A

Product model: NDH - A

满意标准规定：GB/T 1411-2002《物质电绝缘用料耐高偏低交流电电弧充放电充放电的现场实验》（就是指IEC  61621-1997）及ASTM D495等原则的的要求装修设计生产加工的，并适合IEC 149、UL 746A等检测技巧

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要应用的范围及实用功能：

本校正机是依照规定适中用交流接触器、电气和家庭支出电气等职业的电工作业用可塑胶片、环氧树脂胶胶和接地漆等接地产品的耐电孤焊接安全功能考评，主中用液体接地产品如：可塑胶片、聚酯薄膜、环氧树脂胶、矿石、陶瓷制品、安全玻璃、接地油、接地漆、瓦楞纸等媒质的耐电孤焊接安全功能测试仪；

本检测机由算机的控制启动，应该出现某个工作动态及工作时间间隔，工作结束了之后并存储某个工作数据分析，并可直接打印.标准化实验所评估报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为左右两分立式结构的，中下部为操作方法软件，上方为可靠性试验仪。

2 本好产品利用*新自动化操作新技术，利用选购程序代码（IEC或ASTM）可手动完成做实验的时候，并在网上上体现检验步骤和但是。

3 **耐腐蚀性更好，抗干忧能力素质强，试验精密度较高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断日期精度：不低于 ±10ms

2 调压器功率：2kVA

3 功率校正电压值：12.5kV

4 实验设计额定电压gps精度：±3%

5 电流值控住计算精度：±10%  电流值侧量控制精度：1.5%

6 参比电极对岩样经济压力：（0.5±0.05）N

7 探针涂料：钨棒

8 电级时间：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 施用生态温差：（23±2）℃

10 应用氛围气温：（50±5）%

11 交流电源：220V±5%  50Hz  10A

12 应力测试    最简单的方法：   新国标/美标/10 mA 间断性/20 mA 陆续/30 mA间断性/40 mA连着

13 实验程序流程如下图所示：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 类产品编号查询：

NDH-A    耐电弧放电做实验的时候仪-微机控制

NDH-B    耐焊弧实验设计仪-手触屏操纵

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！